-
Chelsea - Medium Blue Wide Herringbone
-
Cranford - Blue White Oxford Stripe
-
Light Blue Graph Check
-
Thin Pink Bengal Stripe
-
Thin Blue Bengal Stripe
-
Exeter - Charcoal Flannel
-
Exeter - Navy Flannel
-
Exeter - Indigo Blue Flannel
-
Exeter - Solid Grey Flannel
-
Pink Poplin
-
Cranford - Ceil Blue Bengal Stripe
-
Cranford - Indigo Blue Bengal Stripe
-
Cranford - Carolina Blue & White Oxford Stripe
-
Herrera Melange - Blue Jacquard
-
Herrera Melange - Navy Jacquard
-
Pescado - Grey Black Tattersall
-
Herrera Melange - Light Grey Jacquard
-
Linosa Light Blue Linen / Cotton Blend
-
Metro - Dark Blue Performance Stretch
-
Sofia - Indigo Chambray
-
Grey Performance Stretch
-
Cornwall Blue Reverse Stripe - Non Iron
-
Cortina - Navy Merino Wool Melange
-
Amelia - Tattersall Gingham 120s
-
Bio-Stretch - Navy
-
Bio-Stretch White
-
Metro - French Blue Performance Stretch
-
Söktaş Noblesse - White Houndstooth 120s
-
Navy White Pinstripe - Non Iron
-
Light Blue Mini Windowpane - Non Iron
-
Light Blue Graf Meander 71 Multi Check
-
Palermo - Pale Blue Twill 100s
-
Wessex Navy Gingham Flannel
-
Wessex Grey Mini Houndstooth Flannel
-
Wessex Charcoal Gingham Flannel
-
Söktaş Crown - Pale Blue Twill 140s
-
Metro - Black Performance Stretch
-
Metro - White Performance Stretch
-
Metro - Pale Blue Performance Stretch
-
Metro - Carolina Blue Performance Stretch
-
Linda Meander - Pink Linen / Cotton
-
Linda Meander - White Linen / Cotton
-
Navy Houndstooth - Cashmere Melange
-
Light Blue Gingham - Cashmere Melange
-
Luton - Dark Blue Polka Dot
-
Zuma - Red Mini Houndstooth
-
Modena - Blue Jacquard
-
Blue Grey Twill - Non Iron
-
White Twill - 100% Non Iron
-
Navy Blue Gingham - Non Iron
-
Wessex Brown Gingham Melange Flannel
-
Andes White Pinpoint 100s
-
Mendoza Flanella - Navy and Blue Check Flannel
-
Olivia - Light Blue Textured Stripe
-
Cranford - Medium Gray Coarse Oxford
-
Milward - Blue White University Oxford
-
Nova - Medium Dark Blue Chambray
-
Duero Gab - Light Blue Solid
-
Rex Meander - Medium Pink Gingham
-
Iris Red Stripe
-
Delphi - Light Pink Stripe
-
Alex - Navy Glenn Plaid
-
Iris Blue Stripe
-
Delphi - Medium Dark Blue Plaid
-
Egyptian Purple Pinpoint
-
Navy and White Pinpoint Stripe
-
Light Blue and White Pinpoint Stripe
-
Pink and White Pinpoint Stripe
-
Egyptian Light Blue Herringbone
-
Egyptian White Herringbone
-
Egyptian Blue Soft Pinpoint
-
Mini Black Banker Stripe
-
Lavender Poplin Stripe
-
Light Gray Poplin Stripe
-
Traditional Baby Blue Gingham
-
Traditional Pink Gingham
-
Cream Twill
-
Light Blue Twill 100s
-
Dark Blue Hairline Pinstripe
-
Mini Blue Gingham
-
Mini Carolina Blue Twill Grid
-
Zuma - Black w/ White Pinstripe
-
Green Pinpoint
-
Purple Pinpoint
-
Light Pink Pinpoint
-
French Blue Pinpoint
-
Milward Light Blue Oxford
-
Light Pink End on End
-
Lavender End on End
-
Norwich Medium Pink Micro Gingham
-
Rose Red Gingham
-
Black Gingham
-
Light Purple Gingham
-
Grey Jacquard Stripe
-
Cream Pinpoint
-
Cream Broadcloth
-
Cleo White Jacquard
-
Blue Pinpoint
-
Light Blue Royal Oxford
-
Wessex Brown Mini Houndstooth
-
Ceil Blue Bengal Stripe - Non Iron
-
Dark Blue Bengal Stripe - Non Iron
-
Palermo - White Twill 100s
-
Zuma - Navy Mini Houndstooth
-
Söktaş Noblesse - White Diamond 120s
-
Sky Blue Cotton / Tencel™
-
Solid White Cotton / Tencel™
-
Rex Meander - Green Gingham
-
Carolina Blue Gingham 120s
-
Tudor - Grey Blue Tattersall
-
Tudor - Blue White Pinstripe
-
Söktaş Crown - White Twill 140s
-
Blue Pinstripe Twill - Non Iron
-
Light Blue Twill - 100% Non Iron
-
Azore Small Blue and White Grid
-
Solid White Twill 100s
-
Vega - Light Blue Royal Oxford Multi Check
-
Vega - Light Blue Royal Oxford Multi Stripe
-
Vega - Blue Oxford Houndstooth
-
French Blue Herringbone
-
Tigris - Light Grey End-on-End
-
Tigris - Light Blue End-on-End
-
Light Blue Poplin 120s
-
White Royal Oxford
-
Vega - Cream Oxford
-
Milward White Oxford
-
Black Twill 100s
-
Goldenrod Pinpoint
-
Dark Blue French Oxford
-
Classic Blue French Oxford
-
Pink French Oxford
-
Classic White 100s Poplin
-
Gabardine White Twill 70s
Collars
English spread-
Point Length - 3" Spread - 5.5"
The English Spread is one of our wider spread collars. Its best accompanied with a wide tie knot (half windsor or full windsor) due to its fuller spread.
-
Point Length - 3" Spread - 4"
The collar itself is a single piece that extends through the front torso and doubles as a placket. This reinforcing effect is that the collar stands on its own, without collapsing under it's own weight. There is no interlining which gives it a roll that you won't see with any other shirt. There is also no top button.
-
Point Length - 3.25" Spread - 3.25"
The button-down is one of the more traditional styles offered. Unlike other collars, these collar points are not stiffened since the points are fastened with buttons. This is a collar best suited for informal environments.
-
Point Length - 2.75" Spread - 3.75"
Our standard collar, with a smaller spread ideal for a smaller tie knot (four-in-hand). This is a versatile collar that can be worn in almost any setting.
-
Point Length - 3.45" Spread - 7"
The Full Cutaway is our widest spread collar. Popularized by the British, this is a distinctive collar that will (rightly or wrongly) distinguish you from the masses. A smaller tie knot will heavily expose the collar band, as such Its best accompanied with a wide tie knot (half or full windsor).
-
Point Length - 2.125" Spread - 3.75"
The mini point collar (like the mini club) is a "vertically challenged" version of the point collar. This is a contemporary collar and pairs well with a skinny, smaller tie knot.
-
Point Length - 3" Spread - 3"
The concealed button down contains hidden button loops on the underside of the collar points. This collar style is ideal for those that are looking for a crisp collar (sans tie) that doesn't collapse when worn with a blazer.
-
Point Length - 2.75" Spread - 3.75"
Also known as the club collar, this style is similar to the forward point, with the difference being the rounded collar points. This style has made a huge resurgence and is now one of our most popular styles offered.
-
Point Length - 3.5" Spread - 3.5"
Undoubtedly unique, the European two button collar is a modern collar best suited for a contemporary environment. The two buttons add collar height, which give it a regal appearance. It should only be worn buttoned with a tie.
-
Point Length - 3.75" Spread - 7"
Slightly longer with a wider spread than our traditional Full Cutaway, our newest cutaway is a sartorial favorite which pairs beautifully with a blazer as the points tuck elegantly under the lapels. When worn sans tie, it has a perfect amount of 'roll' to mimic a button down.
-
Point Length - 3.375" Spread - 5"
Longer point Italian collars are all the rage these days. A contemporary Italian classic that looks perfect with a blazer as the points tuck elegantly under the lapels with a perfect amount of spread.
-
Point Length - 3.875" Spread - 4"
Our pinned collar is essentially a button down collar (sans buttons) with eyelet holes meant to hold a collar bar. This shirt should only be worn with a collar bar and with a tie. We prefer it with a four in hand or half windsor.
-
Point Length - 2.5" Spread - 3"
The mini button-down is a newer more contemporary collar style. Like the traditional button down its points are secured with buttons. Ultimately, this is a collar best suited for informal and casual environments.
-
1” Front Band Height 1.375” Rear Band Height
A standing band-shaped collar that has no full turndown or collar points. Though it’s meant to be worn without a tie, it can be worn in a dressier style if paired with a blazer.
-
2.25” Point Length Spread - N/A
A very formal collar style intended to be worn with a bow tie and under a tuxedo blazer. It’s distinguished by a very firm interlining with just the tips pointing downwards in a wing shape.
-
Cuff Width - 3"
The one button rounded cuff represents our most traditional, well known cuff style. This classic cuff can be worn in almost any setting.
-
Cuff Width - 3"
More commonly worn in Europe, the flowback like the French (also known as the cocktail, portofino, or 'James Bond' cuff) has contoured edges that fold back but are secured with dual buttons rather than cuff links. Our version was patterned to closely match the ones worn by Sean Connery in Thunderball and Dr. No.
-
Cuff Width - 3"
Two button angle cuffs are differentiated by their slanted cut, a style seen on more contemporary shirts.
-
Cuff Width - 3"
Twice as long as button cuffs, French cuffs are folded back and secured with cufflinks. Once considered to be more formal than button cuffs, they are seeing a resurgence in business environments. This style remains the preferred choice for black tie events.
-
Cuff Width - 3"
The two button rounded cuff is a traditional, classic cuff style.
-
Cuff Width - 3"
No different than a traditional French cuff with the difference being the notched, mitered edges.
-
Cuff Width - 3"
A standard, traditional barrel cuff with square cut edges vs. an angle or curve.
-
Cuff Width - 3.5"
The three button angle cuff is distinguished by its longer length and distinctive third button -- popularized by fellow shirtmaker Turnbull & Asser.
-
Cuff Width - None
Elect for a more casual look by selecting a short sleeve which are cut just beneath the bicep. Note: Short Sleeves are not reflected on the shirt model
-
Cuff Width - 3"
A standard, 1 button traditional barrel cuff with square cut edges vs. an angle or curve.
-
Cuff Width - 3"
No different than a traditional square cut French cuff with the difference being the rounded corner
- The standard placket seen on most men's shirts. A strip of fabric raised off the shirt front with stitches down each side, with light interlining sewn within the material. Two rows of top to hem stitching are present, 1/4" in from each edge.
- Material of shirt folded to the underside. Stitches are not shown, but are present on the underside. The edge of the shirt front is folded over to create a creased edge and held together by the button holes.
- Front Placket with an extra strip behind the center for the buttonholes. Buttons are concealed behind the front center. The fly front is rarely found on off the rack shirts and is worn primarily on tuxedo shirts.
-
This placket front features panels of pleated fabric to each side of the button front, with pleats 1/2-inch wide. A very formal look that is typically worn underneath a tuxedo and with a bow tie.
-
Similar in construction to a French placket with the top four buttons secured with studs vs. buttons. A very formal look that is typically worn underneath a tuxedo and with a bow tie.
Add million dollar collar insert to placket?
Million Dollar Collar is an innovative product that prevents shirt collars from drooping or collapsing - typically seen on shirts worn with a blazer (see the Before pic above). The product itself is a flexible plastic/nylon insert that when installed in the placket, stiffens the upper part of the shirt resulting in a crisp, more regal look. This product is perfect for those that love wearing their dress shirts with a jacket sans tie.
- Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter
- An organic composite material produced by some molluscs as an inner shell layer. Slightly thicker than plastic, resilient to breaks, with a beautiful iridescent shine. 7/16” in diameter
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
Standard buttons made from a translucent white resin that is extremely durable and break resistant. Darker fabrics are matched to darker buttons. 7/16” in diameter.
-
An organic composite material produced by some molluscs as an inner shell layer. Slightly thicker than plastic, resilient to breaks, with a beautiful iridescent shine. 7/16” in diameter
- The technique favored by most off the rack shirts. Fused collars and cuffs are stiff and tend to look sharper than sewn ones. The interlining is glued (fused) to both outer facings.
- The traditional interlining shirt construction method, seen almost exclusively on made to measure and bespoke shirts. Non-fused collars are softer in feel and have a timeless look and feel. The interlining material is sewn into position between the two outer facings.
-
No initial embrodiery
Monogramming - No -
Include initial embroidery on your shirt
Monogramming - Yes (+$10)
-
Match color and cuffs to shirt body
-
White Contrasting Collars & Cuffs
- Two pleats conjoined at the center. Pleats face away from the center creating a rectangular fold of fabric down the middle of the back.
- Two pleats placed at opposite ends between the center of the back and shoulder, under the yoke.
-
A sleeker more streamlined look generally worn on slim or athletic fit shirts. Pleats typically allow for more arm / shoulder movement. As such, no pleats can restrict movement in the upper torso.
- No pleats along the yoke along with two straight seams extended down the middle to lower portion of the torso. Darts are beneficial if the goal is a very slim fitting shirt as the true contour of the body is accentuated.
- Shirt bottom is rounded. The rear side is slightly longer than the front. This is the standard / most common bottom hem style worn.
- Plastic collar stays are removable and interchangeable.
- Collar stays are pre-stitched into the collars. They are non-removable.
-
Button down, one piece, tab, and eyelet hole collars do not have collar stays.
- No pocket added
- A left breast pocket is added.
-
A left breast pocket is added.
-
A left breast pocket is added.
-
A left breast pocket is added.
-
A left and right breast pocket is added.
-
A left and right breast pocket is added.
- Add a matching 8 x 8 pocket square with single needle stitched edges.
- Add a matching 8 x 8 pocket square with single needle stitched edges.
- Match Shirt Color
- Black
- Blue
- Gold
- Gray
- Green
- Lavender
- Light Blue
- Navy Blue
- Orange
- Pink
- Red
- White
Fit guarantee
The biggest risk when ordering a custom dress shirt sight unseen is the fit.
Our fit guarantee essentially eliminates the risk.
If for any reason your first shirt does not fit, we'll alter or remake it for you - regardless of fault.
To learn more about our fit policy click here
-
Required NothingSpeed 1 minuteFit accuracy Med-High
Our proprietary algorithm fit model has been used by over 10k customers to achieve a perfect fit. Ideal for those that are short on time as well as a measuring tape.
-
- Standard Sizing 1 minute
- Measure A Shirt 5 - 7 mins
- Measure Your Body 7 - 10 mins
Add a fit profile:
Saved profile
Load an already saved profile
*Please create/select measurement profile
Chelsea - Medium Blue Wide Herringbone
$75 | S510213H- 100% Cotton
- 2 ply / 100s
- Herringbone
- Light-Medium
Chelsea - Medium Blue Wide Herringbone
S510213H
-
Material
100% Cotton -
Thread count
2 ply / 100s -
Fabric weave
Herringbone -
Thickness
Light-Medium
English Spread
Point Length - 3" Spread - 5.5"The English Spread is one of our wider spread collars. Its best accompanied with a wide tie knot (half windsor or full windsor) due to its fuller spread.
Collar size:
15"
Age: 80+
Height:
Slopping shoulders
Sleeve size:
35"
Pant waist:
30"
Jacket size:
45"
Traditional fit
Untucked
Weight:
150 lb
Congratulations!
You’ve completed your QSize Profile!
A perfect fitting shirt is just a few clicks away!
Your calculated Qsize values
Measurements below represent your calculated, algorithm derived values. Please note, these are finished (shirt) measurements and not body measurements.
-
Collar
Value not specified
-
Sleeve
Value not specified
-
Chest
Value not specified
-
Waist
Value not specified
-
Bottom
Value not specified
-
Back
Value not specified
-
Sleeve width
Value not specified
-
Cuffs
Value not specified
-
Length
Value not specified
Next: Apply your qsize to one of our shirt design methods
Neck around
Lay the shirt flat on it's back, remove any wrinkles, and measure from the center of the collar button to the furthest edge of the buttonhole.
Sleeve length
Lay the sleeve flat on it's front and measure from the middle of the back (just beneath the collar) to the edge of the shoulder and then to the end of the cuff. If this is for a short sleeve shirt, please measure as described. Our tailors will determine the correct length if a short sleeve option is selected.
NOTE: If you are inputting a standard sleeve length from an existing shirt, PLEASE first measure as shown in the video. Sleeve sizes on off the rack shirts are commonly 1-1.5" larger than the listed size.
Fit style
Traditional
Our fullest cut offering the most movement and draped loosely to the body. Worn primarily by big and tall men.
Tailored
Our most common cut, best suited for the majority of men. Fit is slightly tapered yet comfortable along the shirt body and arms.
Slim
The most tapered fit offered. Shirt body, shoulders, and arms are draped firmly to the body. Meant for those with broad shoulders and slimmer waists.
Shoulder type
Normal (Default)
The majority of men fall into this category. You should not experience any fabric pulling or bunching with your existing off-the-rack shirts.
Sloping
Some men (weightlifters in particular) have a more pronounced angle / pitch in their shoulders which causes the fabric to stretch from the trapezoid to the lower chest, resulting in a pronounced pulling of the fabric.
Square
Men with very little angle / pitch in their shoulders will see lots of wrinkles / lines along the neck causing excess fabric to bunch up.
Congratulations!
You’ve completed your Standard Profile!
A perfect fitting shirt is just a few clicks away!
Your calculated Standard values
Measurements below represent your calculated, algorithm derived values. Please note, these are finished (shirt) measurements and not body measurements.
-
Collar
Value not specified
-
Sleeve
Value not specified
-
Chest
Value not specified
-
Waist
Value not specified
-
Bottom
Value not specified
-
Back
Value not specified
-
Sleeve width
Value not specified
-
Cuffs
Value not specified
-
Length
Value not specified
Next: Apply your standard sizing to one of our shirt design methods
Neck around
Lay the shirt flat on it's back, remove any wrinkles, and measure from the center of the collar button to the furthest edge of the buttonhole.
Sleeve length
Lay the sleeve flat and measure from the top of the shoulder to the end of the cuff. If this is for a short sleeve shirt, measure to the desired length -- just beneath where the bicep lies is typically preferable.
Chest
Lay the shirt completely flat (buttoned), smooth out any wrinkles, and measure from one edge of underarm to the other.
Waist
Lay the shirt completely flat (buttoned), smooth out any wrinkles, and measure across the narrowest part of the shirt at the waistline.
Bottom
Lay the shirt completely flat (buttoned), smooth out any wrinkles, and measure from one of the bottom hem seams to the other.
Back
Lay the shirt completely flat (buttoned), smooth out any wrinkles, and measure from one edge of the shoulder to the other.
Sleeve width
Lay the shirt completely flat (buttoned), smooth out any wrinkles, and measure from the top of the shoulder to the underarm / armpit.
Cuff
Place the cuff on a flat surface and smooth out any wrinkles. Place the measuring tape on the outer edge of the button hole and measure across to the center of the button.
Length
Lay the shirt completely flat (buttoned), smooth out any wrinkles, and measure from the the bottom of the collar band to the bottom of the shirt.
Shoulder type
Normal (Default)
The majority of men fall into this category. You should not experience any fabric pulling or bunching with your existing off-the-rack shirts.
Sloping
Some men (weightlifters in particular) have a more pronounced angle / pitch in their shoulders which causes the fabric to stretch from the trapezoid to the lower chest, resulting in a pronounced pulling of the fabric.
Square
Men with very little angle / pitch in their shoulders will see lots of wrinkles / lines along the neck causing excess fabric to bunch up.
Congratulations!
You’ve completed your Shirt Profile!
A perfect fitting shirt is just a few clicks away!
Your Shirt measurement values
These values can be edited by clicking view / edit profile button after closing popup.
-
Collar size
Value not specified
-
Sleeve
Value not specified
-
Chest
Value not specified
-
Waist
Value not specified
-
Bottom
Value not specified
-
Back
Value not specified
-
Sleeve width
Value not specified
-
Cuff
Value not specified
-
Length
Value not specified
-
Shoulders
Value not specified
-
Height
Value not specified
-
Weight
Value not specified
Next: Apply your shirt sizing to one of our shirt design methods
Neck around
Measure around the lower portion of the neck (Just under the Adam's apple), where the collar usually sits. Allow two fingers to fit the gap between the tape and your neck.
Sleeve length
With your arm at your side, measure from the tip of the shoulder to 1” below your wrist bone.
Perform this for each sleeve to account for any differences in length. If this is for a short sleeve shirt, measure to the desired length -- just beneath the bicep is typically preferable.
Chest
Measure around the upper (largest) portion of your chest, just under the armpits. Try to inhale when measuring this will ensure that your measurement account for your chest at its fullest.
Waist
Just above the belt line, measure around the fullest part of the waist.
NOTE: This measurement is almost always larger than your pant waist size.
Back
Measure accross the back, from one edge of the shoulder to the other. Make sure that you take into account the curved contour of the shoulders (i.e. do not measure across in a straight line).
Length
Measure from the base of the neck (where the shoulder meets your collar) to the desired length. Typically this is measured to the bottom of the fly on your pants for a tucked in shirt and mid-fly for an untucked shirt.
Seat
Measure around the fullest part of your hips, just below the hip bone.
Bicep
Measure around the circumference of the largest part of your bicep. Let your arms rest at your side and do not flex your bicep.
Wrist
Measure around your wrist (at the bone) where a watch would typically be worn. If you wear a large watch add 1/2 inch to the measurement.
Fit style
Traditional
Our fullest cut offering the most movement and draped loosely to the body. Worn primarily by big and tall men.
Tailored
Our most common cut, best suited for the majority of men. Fit is slightly tapered yet comfortable along the shirt body and arms.
Slim
The most tapered fit offered. Shirt body, shoulders, and arms are draped firmly to the body. Meant for those with broad shoulders and slimmer waists.
Shoulder type
Normal (Default)
The majority of men fall into this category. You should not experience any fabric pulling or bunching with your existing off-the-rack shirts.
Sloping
Some men (weightlifters in particular) have a more pronounced angle / pitch in their shoulders which causes the fabric to stretch from the trapezoid to the lower chest, resulting in a pronounced pulling of the fabric.
Square
Men with very little angle / pitch in their shoulders will see lots of wrinkles / lines along the neck causing excess fabric to bunch up.
Congratulations!
You’ve completed your Body Profile!
A perfect fitting shirt is just a few clicks away!
Your Body measurement values
These values can be edited by clicking view / edit profile button after closing popup.
-
Collar size
Value not specified
-
Sleeve
Value not specified
-
Chest
Value not specified
-
Waist
Value not specified
-
Back
Value not specified
-
Length
Value not specified
-
Seat
Value not specified
-
Bicep
Value not specified
-
Wrist
Value not specified
-
Fit style
Value not specified
-
Shoulders
Value not specified
-
Height
Value not specified
-
Weight
Value not specified
Next: Apply your body sizing to one of our shirt design methods